# Come Creare questa rientranza?

**URL:** <https://it.discourse.mcneel.com/t/come-creare-questa-rientranza/3881>\
**Category:** Sub-D\
**Created:** [10 Marzo 2021, 2:24pm UTC](https://it.discourse.mcneel.com/t/come-creare-questa-rientranza/3881 "2021-03-10T14:24:05Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![erica.g](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/erica.g/32/9404_2.png) [@erica.g](https://it.discourse.mcneel.com/u/erica.g)\
**Post date:** [10 Marzo 2021, 2:24pm UTC](https://it.discourse.mcneel.com/t/come-creare-questa-rientranza/3881/1 "2021-03-10T14:24:05Z")

</div>

Ciao:)  
Premetto che sono parecchio neofita riguardo le subD  
Sto disegnando questa tazza ma non riesco ad imitare la rientranza superiore del bordo della tazza, tendenzialmente escono fuori forme molto morbide e faccio fatica ad imitare angoli o curve strette/dritte.  
Qualche suggerimento?

![Schermata 2021-03-08 alle 17.12.28](https://global.discourse-cdn.com/mcneel/uploads/mcneel_it/original/2X/6/6a350bab6f4dd9bc50719613c8ad1f382af0c0e4.png)

---

<div class="post-metadata">

**Author:** ![leopoldomonzani](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/leopoldomonzani/32/17957_2.png) [@leopoldomonzani](https://it.discourse.mcneel.com/u/leopoldomonzani)\
**Post date:** [10 Marzo 2021, 3:03pm UTC](https://it.discourse.mcneel.com/t/come-creare-questa-rientranza/3881/2 "2021-03-10T15:03:24Z")

</div>

Con \_SubDSweep1.  
Poi chiudere il foro che si crea.  
 ![img1](https://global.discourse-cdn.com/mcneel/uploads/mcneel_it/original/2X/e/e0afd45a623684501d0c6ef1b7618c5b4adf494b.jpeg)

---

<div class="post-metadata">

**Author:** ![AureaLab](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/aurealab/32/7964_2.png) [@AureaLab](https://it.discourse.mcneel.com/u/AureaLab)\
**Post date:** [10 Marzo 2021, 4:01pm UTC](https://it.discourse.mcneel.com/t/come-creare-questa-rientranza/3881/3 "2021-03-10T16:01:00Z")

</div>

\_Revolve \_Output=SubD (versione italiano … tradotto con Revoluzione)

 ![Rivoluzione - Output=SubD](https://global.discourse-cdn.com/mcneel/uploads/mcneel_it/original/2X/7/78902a193c9405777205eb5a16675912aa0c6aab.jpeg)