# Offset surface multiplo

**URL:** <https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800>\
**Category:** Rhino Windows\
**Created:** [17 Dicembre 2019, 4:59pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800 "2019-12-17T16:59:07Z")\
**Posts on this page:** 9\
**Page:** 1

<div class="post-metadata">

**Author:** ![illo76](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/illo76/32/17751_2.png) [@illo76](https://it.discourse.mcneel.com/u/illo76)\
**Post date:** [17 Dicembre 2019, 4:59pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/1 "2019-12-17T16:59:07Z")

</div>

ciao a tutti,  
per caso esiste il comando anche in beta per poter eseguire un offset surface multiplo di una surface o polisurface?  
mi pareva esistesse qualcosa di simile oppure me lo sono sognato?  
grazie

---

<div class="post-metadata">

**Author:** ![0904](https://avatars.discourse-cdn.com/v4/letter/0/b3f665/32.png) [@0904](https://it.discourse.mcneel.com/u/0904)\
**Post date:** [17 Dicembre 2019, 5:11pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/2 "2019-12-17T17:11:48Z")

</div>

ma intendi: “OffsetCrvSuSrf” ?

---

<div class="post-metadata">

**Author:** ![illo76](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/illo76/32/17751_2.png) [@illo76](https://it.discourse.mcneel.com/u/illo76)\
**Post date:** [17 Dicembre 2019, 5:23pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/3 "2019-12-17T17:23:56Z")

</div>

no, offset di superfici o polisuperfici

---

<div class="post-metadata">

**Author:** ![giuseppe](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/giuseppe/32/16416_2.png) [@giuseppe](https://it.discourse.mcneel.com/u/giuseppe)\
**Post date:** [17 Dicembre 2019, 6:17pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/4 "2019-12-17T18:17:14Z")

</div>

Puoi farlo con uno dei metodi di programmazione. Altro è vedere cosa viene fuori. Vuoi GH?

---

<div class="post-metadata">

**Author:** ![illo76](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/illo76/32/17751_2.png) [@illo76](https://it.discourse.mcneel.com/u/illo76)\
**Post date:** [17 Dicembre 2019, 9:37pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/5 "2019-12-17T21:37:54Z")

</div>

Metodi di programmazione?

---

<div class="post-metadata">

**Author:** ![Andrea](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/andrea/32/16005_2.png) [@Andrea](https://it.discourse.mcneel.com/u/Andrea)\
**Post date:** [17 Dicembre 2019, 10:51pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/6 "2019-12-17T22:51:53Z")

</div>

ciao ,  
forse sono fuori tema , ma non ti basta il comando offset superficie ( che fa anche polisuperfici )  
nella barra strumenti superfici ?

ciao , Andrea

---

<div class="post-metadata">

**Author:** ![Andrea](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/andrea/32/16005_2.png) [@Andrea](https://it.discourse.mcneel.com/u/Andrea)\
**Post date:** [17 Dicembre 2019, 10:56pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/7 "2019-12-17T22:56:06Z")

</div>

ovviamente ripetuto

---

<div class="post-metadata">

**Author:** ![giuseppe](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/giuseppe/32/16416_2.png) [@giuseppe](https://it.discourse.mcneel.com/u/giuseppe)\
**Post date:** [18 Dicembre 2019, 10:23am UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/8 "2019-12-18T10:23:07Z")

</div>

yes. GH…Py…  
[offsetmultiplo.gh](https://it.discourse.mcneel.com/uploads/short-url/gzKd36P4m1XvjDDC54kMrLfDbAH.gh) (8,0 KB)

---

<div class="post-metadata">

**Author:** ![illo76](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/illo76/32/17751_2.png) [@illo76](https://it.discourse.mcneel.com/u/illo76)\
**Post date:** [18 Dicembre 2019, 4:42pm UTC](https://it.discourse.mcneel.com/t/offset-surface-multiplo/2800/9 "2019-12-18T16:42:55Z")

</div>

ovvio che si Andrea,  
la mia richiesta è per situazioni in cui l’offset multiplo è da eseguirsi anche su valori di 100 o più…