# Py: Pull su MESH (Vittorio)

**URL:** <https://it.discourse.mcneel.com/t/py-pull-su-mesh-vittorio/114>\
**Category:** Scripting e Programmazione\
**Created:** [18 Aprile 2014, 5:02pm UTC](https://it.discourse.mcneel.com/t/py-pull-su-mesh-vittorio/114 "2014-04-18T17:02:36Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![giuseppe](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/giuseppe/32/16416_2.png) [@giuseppe](https://it.discourse.mcneel.com/u/giuseppe)\
**Post date:** [18 Aprile 2014, 5:02pm UTC](https://it.discourse.mcneel.com/t/py-pull-su-mesh-vittorio/114/1 "2014-04-18T17:02:36Z")

</div>

Ciao Vittorio… o chiunque abbia voglia di aiutarmi.  
Mi servirebbe un componente Py per GH che prenda in ingresso una curva ed una MESH e restituisca in uscita una curva proiettata (con il metodo Pull) sulla MESH.

Grazie fin da adesso!

---

<div class="post-metadata">

**Author:** ![emilio](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/emilio/32/16095_2.png) [@emilio](https://it.discourse.mcneel.com/u/emilio)\
**Post date:** [19 Aprile 2014, 9:45am UTC](https://it.discourse.mcneel.com/t/py-pull-su-mesh-vittorio/114/2 "2014-04-19T09:45:00Z")

</div>

[PullCurveToMesh.gh](https://mcneelusercontent.s3.amazonaws.com/605aac0a15a31915c740548b225f921542099031be.gh) (5.4 KB)

Va bene cosi’ ? Ottieni una polilinea.  
ciao !

---

<div class="post-metadata">

**Author:** ![giuseppe](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/giuseppe/32/16416_2.png) [@giuseppe](https://it.discourse.mcneel.com/u/giuseppe)\
**Post date:** [22 Aprile 2014, 8:19am UTC](https://it.discourse.mcneel.com/t/py-pull-su-mesh-vittorio/114/3 "2014-04-22T08:19:46Z")

</div>

Stupendo Emi!!! Veramente  
Grasssie