# Rimuovere raccordi

**URL:** <https://it.discourse.mcneel.com/t/rimuovere-raccordi/282>\
**Category:** Rhino Windows\
**Created:** [26 Settembre 2014, 1:28pm UTC](https://it.discourse.mcneel.com/t/rimuovere-raccordi/282 "2014-09-26T13:28:04Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![wiivanil](https://avatars.discourse-cdn.com/v4/letter/w/a88e4f/32.png) [@wiivanil](https://it.discourse.mcneel.com/u/wiivanil)\
**Post date:** [26 Settembre 2014, 1:28pm UTC](https://it.discourse.mcneel.com/t/rimuovere-raccordi/282/1 "2014-09-26T13:28:04Z")

</div>

Ciao,  
esiste un comando o un metodo semplice per rimuovere i bordi da un oggetto?

![](https://mcneelusercontent.s3.amazonaws.com/2211783bc3d1b1101a4ffc5aff09d5780f39b172eb6.jpg)

Grazie  
Ciao

---

<div class="post-metadata">

**Author:** ![emilio](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/emilio/32/16095_2.png) [@emilio](https://it.discourse.mcneel.com/u/emilio)\
**Post date:** [26 Settembre 2014, 11:29pm UTC](https://it.discourse.mcneel.com/t/rimuovere-raccordi/282/2 "2014-09-26T23:29:36Z")

</div>

Credo che si potra’ fare, almeno in certi casi, con Rhino 6.  
Per ora :  
UntrimAll [ExtendSrf] ConnectSrf (quando funziona) e/o Trim e/o CreateSolid (non ancora provato)  
… altro non saprei … ☹  
ciao

---

<div class="post-metadata">

**Author:** ![wiivanil](https://avatars.discourse-cdn.com/v4/letter/w/a88e4f/32.png) [@wiivanil](https://it.discourse.mcneel.com/u/wiivanil)\
**Post date:** [29 Settembre 2014, 6:31am UTC](https://it.discourse.mcneel.com/t/rimuovere-raccordi/282/3 "2014-09-29T06:31:08Z")

</div>

Ok, grazie. Faccio delle prove!