# Salvadanaio Gatto chibi

**URL:** <https://it.discourse.mcneel.com/t/salvadanaio-gatto-chibi/8648>\
**Category:** Galleria\
**Created:** [9 Gennaio 2026, 3:22pm UTC](https://it.discourse.mcneel.com/t/salvadanaio-gatto-chibi/8648 "2026-01-09T15:22:49Z")\
**Posts on this page:** 2\
**Page:** 1

<div class="post-metadata">

**Author:** ![Brvdln](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/brvdln/32/16664_2.png) [@Brvdln](https://it.discourse.mcneel.com/u/Brvdln)\
**Post date:** [9 Gennaio 2026, 3:22pm UTC](https://it.discourse.mcneel.com/t/salvadanaio-gatto-chibi/8648/1 "2026-01-09T15:22:49Z")

</div>

Salvadanaio realizzato con **Blender** per la modellazione, mentre con **Rhinoceros** ho gestito tutto ciò che riguarda i comandi di differenze booleane, shrinkwrap, incastri e remesh.  
Ho utilizzato Blender per la modellazione solo per una mia comodità personale, ma volendo si poteva realizzare anche con le SubD di Rhino.

 ![Salvadanaio_cat-chibi 2.PNG](https://global.discourse-cdn.com/mcneel/uploads/mcneel_it/original/3X/5/b/5b5cae608c43c9a2c2ad03f810579a4ac54820ae.jpeg)  
 ![Salvadanaio_cat-chibi 3.PNG](https://global.discourse-cdn.com/mcneel/uploads/mcneel_it/original/3X/4/6/46e6057bead7127ebb270675ed174b2a22123a8d.jpeg)

---

<div class="post-metadata">

**Author:** ![Brvdln](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/brvdln/32/16664_2.png) [@Brvdln](https://it.discourse.mcneel.com/u/Brvdln)\
**Post date:** [12 Gennaio 2026, 9:46am UTC](https://it.discourse.mcneel.com/t/salvadanaio-gatto-chibi/8648/2 "2026-01-12T09:46:11Z")

</div>

![IMG_20260111_180101](https://global.discourse-cdn.com/mcneel/uploads/mcneel_it/original/3X/f/6/f6714c1e1d68cda7cfa87d92c1b4c4fedd3ee686.jpeg)  
Primo pezzo, supporti da togliere