# Split isoparametriche

**URL:** <https://it.discourse.mcneel.com/t/split-isoparametriche/1699>\
**Category:** Rhino Windows\
**Created:** [13 Maggio 2018, 9:28am UTC](https://it.discourse.mcneel.com/t/split-isoparametriche/1699 "2018-05-13T09:28:16Z")\
**Posts on this page:** 3\
**Page:** 1

<div class="post-metadata">

**Author:** ![massimo.rufo](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/massimo.rufo/32/16036_2.png) [@massimo.rufo](https://it.discourse.mcneel.com/u/massimo.rufo)\
**Post date:** [13 Maggio 2018, 9:28am UTC](https://it.discourse.mcneel.com/t/split-isoparametriche/1699/1 "2018-05-13T09:28:16Z")

</div>

ciao  
vorrei splittare una superficie per isoparametriche però ho un solido e il comando non si attiva, come posso fare?  
grazie  
Max

---

<div class="post-metadata">

**Author:** ![Giorgio\_Gurioli](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/giorgio_gurioli/32/17821_2.png) [@Giorgio\_Gurioli](https://it.discourse.mcneel.com/u/Giorgio_Gurioli)\
**Post date:** [13 Maggio 2018, 10:06am UTC](https://it.discourse.mcneel.com/t/split-isoparametriche/1699/2 "2018-05-13T10:06:03Z")

</div>

esplodi ed estrai da ogni superficie utilizzando gli snap per farle collimare

---

<div class="post-metadata">

**Author:** ![Antonio\_Molinaroli](https://sea3.discourse-cdn.com/mcneel/user_avatar/it.discourse.mcneel.com/antonio_molinaroli/32/16110_2.png) [@Antonio\_Molinaroli](https://it.discourse.mcneel.com/u/Antonio_Molinaroli)\
**Post date:** [14 Maggio 2018, 3:56pm UTC](https://it.discourse.mcneel.com/t/split-isoparametriche/1699/3 "2018-05-14T15:56:17Z")

</div>

Ciao Massimo quando hai dei dubbi schiaccia F1 (help)

 ![5](https://discourse-cdn-aws1.com/mcneel/uploads/mcneel_it/original/2X/b/bb6baa06c8ef36b4f328505241579d0c9ce4502c.jpg)